Publication Abstracts

Stormwater Characteristics on 3rd Mainland Bridge Lagos, Nigeria

Print PDF

Authors: Adekunle, A.A., J.K. Adewumi, N.J. Bello and J.O. Akinyemi
Journal of Applied Technology in Environmental Sanitation. Volume 2 , Number 3: 135- 144, October , 2012

Abstract

Stormwater from highways contain pollutants from vehicular activity. Vehicle emissions include pollutants such as heavy metals, oil and grease and particulates which settle on the highway.

Convective Thin-Layer Drying Characteristics of Sesame Seed

Print PDF

Authors: O.U. Dairo, T.M.A. Olayanju
International Journal of Engineering Research in Africa
Vol. 7 (2012) pp 55-62

Abstract

Fundamental Information on Drying and Re-Wetting Characteristics of Agricultural Seeds Is Required in the Design and Aeration Systems as Well as in the Prediction of Drying Rate Using Various Mathematical Models.

Computer Aided Plant Layout Development for an Aluminum Product Factory

Print PDF

Authors: Ogedengbe, T.S., Adejuyigbe, S.B., Ismaila, S.O., Adewumi, B.A., Ali, D.M.
The Pacific Journal of Science and Technology. 13 (1): 358 – 371
Abstract
This study presents research into the use of computers as a tool to aid the planning of layouts in factories to reduce daily cost incurred, using developed software.

Mechanical Engineering Publication Abstracts

Print PDF

2012

  • S.O. Alayande, E.O. Dare W.B. Ayinde, 1. Bamigbose, P.O. AIYEDUN and G.A Osinkolu (2012) "Development of ordered and disordered macroporous silica from bagasse ash." African Journal of Pure and Applied Chemistry, Vol. 6 (1) pp. 10-14, Jan. 2012. http://www.academicjournals.org/AJPAC.ISSN 1996-0840.
  • M. O. Oke, S. O. Awonorin, R. Asiedu and P. O. AIYEDUN (2012). "Effect of Extrusion Variables on Extrudates Properties of Water Yam Flour - A response Surface Analysis." Journal of Food Processing and Preservation. ISSN 1745-4549. 2012. Wiley Periodicals Inc. doi : 10111/j~ 1745 - 4549. 2011.00661.x Pp 1 - 18.
  • O. S. Olokode, S. O. Fakolujo, P. O. AIYEDUN, Z. O. Jaji, F. T. Owoeye and B. U. Anyawu. (2012). "Experimental Study on the Morphology of Keratin Based Material for Asbestors Free Brake Pad" Journal of Basic and Applied Sciences. Vol. 8, Pp. 302¬308. ISSN:1814-8085 /E-ISSN:1927-5129/12. Lifescience Global.
  • P.O. Aiyedun, O.S. Olokode, S.O. Fakolujo, and B.U. Anyanwu. (2012). "An evaluation of strength characteristics of osiele clay." The pacific Journal of Science and Technology. http://www.akamaiuniversity.us/PJST.htm. Vol.13.No.1 pp 78-82.
  • O.S. Fakolujo, O.S. Olokode, P.O. Aiyedun, Y.T.Oyeleke, B.U. Anyanwu and W.E.Lee.(2012)." Studies on the Five (5) Selected Clays in Abeokuta, Nigeria." The pacific Journal of Science and Technology. http://www.akamaiuniversity.us/PJST.htm. Vol.13.No.1 pp 83-90.
  • F.T. Owoeye, O.S. Olokode, P.O. Aiyedun, and B.D. Anyanwu (2012) ." Comparative Analysis of Corrosion of Aluminium Plates in different Concentrations of Lime Solution." The Pacific Journal of Science and Technology. http://www.akamaiuniversity.us/PJST.htm. Vol.13.No.1 pp 105-111.
  • B.D. Anyanwu, O.S. Olokode, P.O. Aiyedun, F.T. Owoeye, and Y.T.Oyeleke (2012)." Potentials of Ukwa Tree (Sterculia Setigera) as a source of raw material for pulp and paper making."The Pacific Journal of Science and Technology. http://www.akamaiuniversity.usIPJST.htm. Vol l3.No.1 pp 145-151.
  • O.S.Abiola, AO.Owolabi, O.M.Sadiq and P.O.Aiyedun (2012) 'Application of Dynamic Artificial Neural Network for Modelling Ruts Depth for Lagos-Ibadan Expressway, Nigeria; ARPN Journal of Engineering and Applied Sciences, Vol.7, No 8 pp 987 -991. Available online at www.arpnjournals.com
  • O.R.Adetunji, P.O.Aiyedun, S.O.Ismaila, MJ.Alao (2012) , Effect of Normalizing and  Hardening on Mechanical Properties of Spring' Journal of Minerals Characterization and Engineering, VoLl1,pp 832-835. Available online at http://www.sciRP.org/journal/jmmce).
  • A.E. Adeleke, P.O.Aiyedun, M.A.Waheed, L.O.Sanni, S.O.AOlawale and O.U.Dairo (2012) 'Effect of Reflux Ratio on the Design of Distillation Column of a Bioethanol Plant using Cassava as Feedstock' Energy Technology and Management Conference Proceedings, Held at Conference Centre of University of Ibadan, 5-7 September, 2012.
  • MOGAJI, P.B and ADEJUYIGBE.S.B. (2012) Computer Aided Costing for Sand Casting Products using Product Mix Model. Paper Presented at 3 rd International Conference on Engineering Research and Development ICER&D University of Benin, Benin City, Nigeria ih - 9th Sept. 2010. Book of Abstract pp 165. Conference Proceedings pp 1576 - 1585. Publication in the Advanced Materials Research Journal published by Trans Tech Publications Ltd, Zurich, Switzerland Vol. 367 pp 279-285 (2012) doi: 10.4028/www.scientific.net/AMR.367.279 - Foreign Publication
  • ADEYEMI, H. 0., ADEJUYIGBE, S. B., ISMAILA, S. O. AND ADEKOYA, A F. (2012) Fuzzy Linguistic Model for Evaluating MSDs - Risk in Construction Works. Applied Ergonomics Journals, Netherlands, Elsevier Journals. - Under Review ¬Foreign Publication.
  • ADEKUNLE, A. A and ADEJUYIGBE, S. B. (2012) Fabrication of Plastic Water Filter and Testing with Slow Sand Filtration Method. The Pacific Journal of Science and Technology, Volume 13, Number 1, May, 2012 pp. 121- 132 http://www.alkamauniversity.us/PJST.htm  - Foreign Publication.
  • ADEKUNLE, A. A. and ADEJUYIGBE, S. B. (2012) Computer Aided Design Software for Welding a Hollow Cylinder. Accepted in Journal of American Sciences, New York. - Foreign Publication
  • ADEKUNLE, A. A. and ADEJUYIGBE, S. B. (2012) CAD/CAM for Welding.
    Accepted in Journal of American Sciences, New York. - Foreign Publication
  • ADEJUYIGBE, S.B. MOGAJI, P.B. and ODUFALE, 0.A.(2012) Development of Computer-Aided Design Software for Jigs and Fixtures for Drilling Flanges, Au Journal of Technology, Assumption University (ABAC), Hun Mak Bangkok, Thailand. Accepted on 19 March, 2012. - Foreign Publication
  • ADEJUYIGBE, S. B. BOLAJI, B. O. OLANIPEKUN, M. U. and ADU M. R. (2012) Development of a Solar Photovoltaic Power System to Generate Electricity for Office Appliances. International Journal of Science and Technology Accepted on 2nd April,
    2012 for Vol. 2 No.     3. http://www.ejournalofsciences.org. http://www.ejournalofsciences.org/  -    Foreign Publication.
  • BOLAJI, B. O. and ADEJUYIGBE, S. B. (2012) Evaluation of Maintenance Culture in Manufacturing Industries in Akure Metropolitan of Nigeria. Published in the Journal of Information Engineering and Applications. A Publication of the International Institute for Science, Technology and Education (IISTE) USA Vol. 2 No.3, 2012 pp 37- 44 - Foreign Publication.
  • ADEKUNLE, A. A. and ADEJUYIGBE, S. B. (2012) Construction of Plastic Water Filter. International Journal of Scientific and Engineering Research (IJSER) Vol. 3, Issue 3, March 2012 Edition - Foreign Publication.
  • ADEKUNLE, A. A. ADEJUYIGBE, S. B. and OYETUNJI O. R. (2012) Construction of Inverter Powered Lawn Mower. American International Journal of Contemporary Research (AIJCR), International Balkan University, 1425, Greenway, USA. Vol.2 No.4 - Accepted on 9th May, 2012 - Foreign Publication.
  • OYELAMI, A. T., S. B. ADEJUYIGBE, M.A. WAHEED, A. K. OGUNKOYA,
    and D. ILlY A.(2012) Analysis of Radial - Flow Impellers of Different Configurations. The Pacific Journal of Science and Technology (PJST); 13(1):24-33, Akama University. http://www.akamauniversity.us/pPJST.htm Foreign Publication
  • OGEDENGBE, S.T. .S. B. ADEJUYIGBE, S. O. ISMAILA. B. A. ADEWUML AND D. M. ALl (2012) Computer Aided Plant Layout Development of an Aluminum Product Factory. Pacific Journal of Science & Technology (PJST), Akama University. Vol. 13(1):358-371 http://www.akamauniversity.us/pPJST.htm- Foreign Publication
  • MUSA, LA., ISMAILA, S.O. ADEJUYIGBE, S.B., AKINYEMI, O.D.AND ABOLARIN M.S. (2012) Comparison of Biomechanical and Anthropometric Data of Nigeria Tertiary Institution Students with Some Selected Countries. Management Science Letters, Growing Science, Vol. 2 Pages 1885 18904 www.growingscience.co/msi.vol
  • SAMUEL OSEKAFORE ATTOYE, SAMUEL BABATOPE ADEJUYIGBE AND BULlAMINU KAREEM (2012) Development of an Auxiliary Machining Module for the Machine Tools Industry. Journal of Machanics Engineering and Automation. Vol. 2 Number 5, May, 2012 (Serial No 11) pp. 279-288. www.davidpublishing.com  ISSN 2159-5275(Print), USA. ISSN 2159-5283 (Online)
  • ADEKUNLE, A A. ADEJUYIGBE, S. B. and ARULOGUN, O. T. (2012) Development of CAD Software for Shaft under Various Loading Conditions. Paper Presented at The International Conference on Modeling, Optimization and Computing (ICMOC 2012, April 10 - 11 th) India. Elsevier Science Direct Procedia Engineering 00(2011) 000-000. Available Online at www.sciencedirevct.com. - Foreign Publication.
  • ADEKUNLE, A A ADEJUYIGBE, S. B. and ARULOGUN, O. T. (2012) Computer Aided Design and Drafting Software Development for Robotic Welding. International Conference on Mechanical Engineering and Mechatronics (ICMEM 2012 - 16th - 18th August), Ottawa, Canada.- Accepted for Presentation - Foreign Publication
  • OYELAMI, O.T. ADEJUYIGBE, S.B. and WAHEED, M. A .. (2012) Performance Evaluation of Recuperative Heat Exchanger in Rotary Furnace. Paper Presented at the World Congress on Engineering, Imperial College, London. Organised by International Association of Engineers (IAENG). Proceedings of the World Congress on Engineering 2012 Vol. III WCE 2012, July 4 - 6 2012, London, U.K.pp1766¬17772. - Foreign Publication.
  • MOGAJI, P.B. AND ADEJUYIGBE, S. B. (2012) Improved Design and Fabrication of a Cassava Chipping Machine. Accepted Paper to be Presented in the 4th International Conference on Engineering Research and Development (ICERD 2012),. 4th - 6th September 2012 .. Organised by the Faculty of Engineering, University of Benin, Benin City.
  • MOGAJI, P. B. ADEJUYIGBE, S. B. ADEROBA, A A AND KAREEM B. (2012) Optimization of Production Planning and Control for Polyrethane Foam using Expert System. Accepted Paper to be Presented in the 4th International Conference on Engineering Research and Development (ICERD 2012),. 4th - 6th September 2012 .. Organised by the Faculty of Engineering, University of Benin, Benin City.
  • OWOYEMI T. J. ADEJUYIGBE, S. B. BOLAJI, B.O .. AND AKINW ALE A. T. (2012) Simulation of Refrigeration System in a Food Processing Company, A Case of Nigeria Bottling Company. Accepted Paper to be Presented in the 4th International Conference on Engineering Research and Development (ICERD 2012), 4th - 6th September 2012. Organised by the Faculty of Engineering, University of Benin, Benin City.
  • ADEJUYIGBE, S. B. (2012) Conflict Resolution of Planning and Maintenance of Infrastructural Facilities in Nigerian Universities. Accepted Paper to be Presented in the 4th International Conference on Engineering Research and Development (ICERD 2012), 4th - 6th September 2012. Organised by the Faculty of Engineering, University of Benin, Benin City.
  • ADEUYI, TOBI AND ADEJUYIGBE, S. B. (2012) Development of an Enhanced Expert System for Card-Based Transaction in the Banking Industry. Accepted Paper to be Presented in the Nigerian Society of Engineers Conference, "HARMONY 2012", December, 2012, Ilorin.
  • Ohijeagbon, 1.0., Waheed, M. A. and Jekayinfa, S.O. (2012). Cumulative exergetic assessment of LPFO utilized steam, Accepted for publication by the International Journal of Exergy.
  • Oyelami, AT., Adejuyigbe, S.B. and Waheed, M.A. (2012). Modeling and Simulation of Thermodynamic Properties of Streams in High-Temperature Melting Furnaces (Accepted for publication by Nigerian Journal of Materials Science and Engineering (NJMSE)
  • Oyelami AT., Adejuyigbe S.B., WaheedM.A., Ogunkoya AK. and !liya D. (2012). Analysis of Radial-Flow Impellers of Different Configurations (Accepted for the Spring 2012 Edition of The Pacific Journal of Science and Technology, PJST)
  • A.T. Oyelami, S.B. Adejuyigbe and M.A. Waheed (2012). Performance Evaluation of Recuperative Heat Exchanger in Rotary Furnace (Accepted for Publication in the Conference Proceeding (ISBN: 978-988-19251-3-8) of the World Congress on Engineering (WCE), organized by the International Association of Engineers (IAENG), London UK
  • Waheed, M.A, Oni,AO, Fadare, D.A, Sulaiman, M.A (2012) Assessment of household energy utilisation in Ibadan, Southwestern Nigeria. (Accepted for publication by Journal of Energy Engineering)
  • Bolaji, B.O. and Falade T.O. (2012). Development of an Experimental Apparatus for Demonstrating Vapour Compression Refrigeration System. International Journal of Thermal and Environmental Engineering. 4 (1); pp. 1-6. Published by the International Association for Sharing Knowledge and Sustainability (lASKS), Canada. Available online at http://www.iasks.org/sites/default/files/i jtee20 120401001006.pdf
  • B.O. Bolaji and Z. Huan (2012). Computational Analysis of the Performance of Ozone-Friendly R22 Alternative Refrigerants in Vapour Compression Air¬Conditioning Systems. Environment Protection Engineering, Published by the Wroclaw University of Technology, Poland, (Letter of Acceptance dated May 20, 2012).
  • Musa A. I., S. O. Ismaila, S. R Adejuyigbe, O. D. Akinyemi and M. S. Abolarin (2012): Comparison ofbiomechanical and anthropometrical data of Nigeria tertiary institution students with some selected countries, Management Science Letters 2; 1885-1894, Published by Growing Science, Ontario, Canada. Available online at www.GrowingScience.com//doi:10.5267/Lms1.2012.06.035
  • Ogedengbe, T. S., S. R Adejuyigbe, S. O. Ismaila, RA. Adewumi, and D. M. Ali. (2012): Computer Aided Plant Layout Development for an Aluminum Product Factory, Pacific Journal of Science and Technology 13(1); 358-371, Published by Akamai University, USA. Available online at www.akamaiuniversity.us/PJST131358.pdf
  • Ismaila S.O. & Charles-Owaba O. E. (2012): A Quantitative approach for Establishing Safe Weight of Lift, Engineering Review 32 (1); 1-8, Published by Faculty of Engineering/Faculty of Civil Engineering, University of Rijeka, Croatia. Available online at www.hrcak.srce.hr/engineering-review
  • Ismaila S.O., Oriolowo K.T. & Akanbi O. G. (2012): Work capacity assessment Nigerian bricklayers, Management Science Letters 2; 263-272, Published by Growing Science Ltd., Ontario, Canada. Available online at doi:10.5267/j.ms1.2011.08.014
  • Olokode O.S., Fakolujo O.S., Raheem, Aiyedun P.O. and Anyanwu B.U. (2012) "Compressive Strength of Some Selected Abeokuta Clay Utilizing Cow Scat as Additive."
  • O.S. Olokode, S.O. Fakolujo, P.O. Aiyedun, W.E. Lee, B.U. Anyanwu and F.T. Owoeye. (2012) "Assessment of Ajebo, Abeokuta Kaolin Clay Deposit for Potential Porcelain Stoneware Tiles Composition Formulation" Journal of Natural Sciences, Engineering & Technology, Vol. 10, Number 2.
  • B.D. Anyanwu, O.S. Olokode, P.O. Aiyedun, F.T. Owoeye and Y.T. Oyeleke. "Potentials of Ukwa Tree (Sterculia setigera) as a source of Raw Material for Pulp and Paper Making." The Pacific Journal of Science and Technology, Volume 13. Number 1. (Spring). http://www.akamaiuniversity.us/PJST.htm.
  • F.T. Owoeye, O.S. Olokode, P.O. Aiyedun and B.U. Anyanwu. "Comparative Analysis of Corrosion of Aluminium Plates in Different Concentrations of Lime Solution." The Pacific Journal of Science and Technology, Volume 13. Number 1 (Spring). http://www.akamaiuniversity.us/PJST.htm.
  • O.S. Fakolujo, O.S. Olokode, P.O. Aiyedun, Y.T. Oyeleke, B.D. Anyanwu and W.E. Lee (2012) "Studies on the Five (5) Selected Clays in Abeokuta, Nigeria." The Pacific Journal of Science and Technology, Volume 13. Number 1 (Spring). http://www.akamaiuniversity.us/PJST.htm.
  • P.O. Aiyedun, O.S. Olokode, S.O. Fakolujo and B.U. Anyanwu (2012) "An Evaluation of Strength Characteristics of Osiele Clay." The Pacific Journal of Science and Technology, Volume 13. Number 1 (Spring). http://www.akamaiuniversity.us/PJST.htm.
  • O.S. Olokode, P.O. Aiyedun, Raheem, D.M., F.T. Owoeye, H.O. Balogun and B.U. Anyanwu (2012) "Production and Characterization of Clay-Cow Scat Insulating Fire¬Bricks.
    130.    Anyanwu, B.U., Olokode, O.S., Aiyedun, P.O., Owoeye, Y.T. (2012) "Optimization of the Fiber and Physical Properties of Sterculia Setigera as an Alternative Source of Raw Material for Pulp and Paper Making. Global Advanced Research Journal of Engineering, Technology and Innovation (ISSN:2315-5124) Vol. 1 (5).
  • O.S. Olokode, S.O. Fakolujo, P.O. Aiyedun, Z.O. Jaji, F.T. Owoeye and B.D. Anyanwu (2012) "Exerpimental Study on the Morphology of Karatin Based Material for Asbestors Free Brake Pad." Journal of Basic & Applied Sciences Vol. 8.
  • F.T. Owoeye, O.S. Olokode, P.O. Aiyedun and B.U. Anyanwu. "Preparation and Characterization of Ceramic Microfiltration Membrane for Water Treatment." 4th International Conference on Engineering Research and Development (ICERD 2012), paper number ICERD 12107.
  • O.S. Olokode, P.O. Aiyedun, F.T. Owoeye, H.O. Balogun and B.U. Anyanwu. "Evaluation of the Efficiency of Ceramic Membrane Pots in Treatment of Food Beverages." 4th International Conference on Engineering Research and Development (ICERD 2012). Paper Number ICERD 12040
  • O.R.Adetunji, P.O.Aiyedun, S.O.Ismaila, MJ.Alao (2012) , Effect of Normalizing and Hardening on Mechanical Properties of Spring' Journal of Minerals Characterization and Engineering, Vol. 11 ,pp 832-835 . Available online at http://www.sciRP.org/journal/jmmce).
  • Adetunji, O.R. and Alao, MJ. (2012): The Influence of Annealing Temperatures on the Ductility and Toughness of springs. Pacific Journal of Science and Technology. 13(1): pp. 63-66. Published by Akamai University of United States of America. Available on line at http://www.akamaiuniversity.usIPJST.htm
  • Ismaila, S.O.; O. G. Akanbi; N.O. Adekunle; O.R. Adetunji & S.l. Kuye: (2012)     An Ergonomics Assessment of Locally Fabricated Passengers' Seats in Buses in South Western Nigeria. Sigurnost (Safety). Published by Institute of Safety Research and Development, Croatia.
  • Oladejo, K.A and N.O Adekunle ,. Spreadsheet as a Tool for Teaching Kinematic Analysis of Planar Slider-Mechanism in Mechanics of Machines


2011

 

  • O.S.Olokode, P.O. Aiyedun, G.O. Oluwadare, O.J. Alamu, S.O Fakolujo, and W.E. Lee.(2010)."Characterization of Ajebo Clay in South West Nigeria" Journal of Natural Sciences, Engineering Technology. Vol. 9, No.2, pp. 50-59.
  • P.O. AIYEDUN, O.S. Igbudu, B.O. Bolaji (2011) "Simulation of Torque during Rod Rolling of HC SS316 at low strain rate using 'Phantom Roll' Method." Journal of Minerals & Materials Characterization & Engineering. Vol. 10, No. 15, pp. 1473¬1485,2011 jmmce.org
  • O.S. Olokode and P.O. AIYEDUN (2011) "Mineralogical Characteristics of Natural Kaolins from Abeokuta; South-West Nigeria." The Pacific Journal of Science and Technology (PJST). Vol. 12, No.2, pp. 558-565.
  • O.R. Adetunji, P.O. Aiyedun, OJ. Alamu and AS. Surakat (2011)."Electrochemical properties of metals in cassava fluid." Journal of Engineering and Technology Research. Vol.3(10) pp. 292-297.
  • Adetunji, O.R., AIYEDUN, P.O., Arowolo, T.A and Alamu, O.J.     (2011) "Characterization of Vacuum Thermally Deposited Aluminum Zinc Nano- Thin Film." Nigerian Materials Congress 2011 (NIMACON 2011), Nov. 21-24, 2011, EMDI, Akure, Nigeria. Presented at the Conference.
  • Adetunji, O.R., P.O. AIYEDUN, T.A Arowolo and OJ. Alamu (2011) "Corrosion Performance of Aluminium Zinc Alloy coated, steel in Cassava Juice, Maize Pulp and Seawater Solution." Nigerian Materials Congress 2011 (NIMACON 2011), Nov. 21¬24,2011, EMDI, Akure, Nigeria. Presented at the Conference.
  • MUSA, LA, ISMAILA, S.O. ADEJUYIGBE, S.B. and AKINYEMI, 0.D.(2011) Ergo-Effects of Designed School Furniture and Writing Positions on Students Behaviour and Musculo-Skeletal Disorder in Nigeria Tertiary Institution. Management Science Letters 1 (2011) homepage -www.GrowingScience.com/msl ¬Foreign Publication.
  • MUSA, L A, ISMAILA, S. O. ADEJUYIGBE, S. B. and AKINYEMI, O.D. (2011) Ergonomics Evaluation and Design of Tables and Chairs for use in Tertiary Institutions in Nigeria. Human Factors in Organizational Design and Management - X Volume 2 pp 11-201 to 11-206. International Ergonomics Association, Rhodes University, Grahamstown, South Africa. Selected and peer reviewed papers from the Tenth International Symposium on Human Factors in Organizational Design and Management held in Grahamstown, Eastern Cape, South Africa, April 4-6, 2011. ¬Foreign Publication
  • OYELAMI, AT., ADEJUYIGBE, S.B., AND WAHEED, M.A (2011) Modeling and Simulation of Thermodynamic Properties of Streams in Liquid- Fuel Fired Furnaces. Accepted for Publication in Nigerian Journal of Material Science and Engineering (NJMSE), Centre for Energy Research and Development, Obafemi Awolowo University, Ile Ife, Nigeria.
  • OYELAMI, AT., AND ADEJUYIGBE, S.B. (2011), Significance of Heat Exchanger Incorporation in Fuel- Fired Furnaces. Contribution of Chapter in a Book Titled "Heat Exchangers" Intech Open Access Publisher (University Campus) STeP Ri, Slavka Krautzeka 83/A, 51000 Rijeka Croatia. Expected Date of Printing including online Publication Dec 07 2011 - Foreign Publication.
  • ADEWARA, 1. A, ADEKEYE K., ASIRIBO. E. O. and ADEJUYIGBE, S.B. (2011) Minimax Multivariate Control Chart Using a Polynomial Function - Applied Mathematics Journal. Scientific Research Publishing Inc., Vol. 2 No 12, 2011 pp 1539-1545.
  • ADEJUYIGBE, S. B. (2011) Trends in Science, Engineering and Technology in Nigeria for Productivity and Development. An Invited Lead Paper presented at the Osun State University, Osogbo, College of Science, Engineering and Technology, Osogbo on March 15th 2011.
  • ADEJUYIGBE, S. B. (2011) Fundamentals and Trends of Computer Aided Engineering (CAE) for Engineers: The Nigerian Situation. An invited Paper Presented at the Workshop Organised for the Staff of Federal Ministry of Science and Technology, National Agency for Science and Engineering Infrastructure, Engineering Material Development Institute, Akure on 6th June, 2011.
  • LASEINDE, O.T. and ADEJUYIGBE, S.B. (2011) Application of Virtual Reality for the Production of Gears. Paper Presented at Nigerian Materials Congress 2011, Akure on 22nd November, 2011
  • LASEINDE, O. T., ADEJUYIGBE, S.B. and ISMAILA, O.T (2011) Virtual Reality as a Tool for Reducing Road Design/ Construction Cost. Paper Presented at Nigerian Materials Congress 2011, Akure on 22nd November, 2011
  • OYELAMI, O.T. ADEJUYIGBE, S.B. and OLUNLADE B. A (201l) Simulation of Heat Distribution in Recuperative Heat Exchanger for Waste Heat Recycling. Paper Presented at Nigerian Materials Congress 2011, Akure on 22nd November, 2011.
  • Waheed, M. A., Odewole, G. A., and Alagbe, S. O. (2011). Mixed Convective Heat Transfer in Rectangular Enclosures Filled with Porous Media, ARPN Journal of Engineering and Applied Sciences, vol. 6(8), pp. 47 - 60.
  • Sangotayo, E. O. and Waheed, M. A. (2011). Parametric Study of Heat Characteristics of Fluid in Cylindrical Parabolic Concentrating Solar Collector". Pacific Journal o/Science and Technology. 12(1):152-160.
  • Odewole, G.A., Waheed, M. A. and Olaoye, O. S. (2011): Experimental Measurement of Heat Transfer Rates in Heated Duct with Inclined Ribs. LAUJET, Vol. 6, Issue 2, pp. 12 - 18. 2.
  • Odewole, G.A., Waheed, M. A. and Olaoye, O. S. (2011): Measurement of Mean Velocity Profile in a Turbulent Pipe Flow - A Numerical Approach. LAUJET, Vol. 7, Issue 1, pp. 1 - 5.3.
  • Ohijeagbon, 1.0., Waheed, M. A. and Jekayinfa, S.O. (2011): Annual and Compounded Life Cycle Cost Analysis of Steam Boiler. LAUJET, Vol.6, Issue 2,pp.91-96
  • Waheed, M. A., Odewole, G. A, Alagbe, S. 0., Kuye, S. r. and Ismaila, S. O. (2011). Visualization of Buoyancy Induced Heat Flow in Rectangular Enclosures Filled with Nanofluids Using Heatfunction Formulation Approach, Second African Conference on Computational Mechanics - An International Conference - AfriCOMP11, January 5 - 8, 2011, Cape Town, South Africa
  • Oni, AO., Fadare, D.A, Waheed, M.A., Adewumi, A, Adejobi, O.J. and Sulaiman, M.A Exergetic Assessment of a Crude Oil Distillation Plant. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18,2011.
  • Sulaiman, M.A, Fadare, D.A, Oni, AO., Waheed, M.A. and Ajulo, AO. Thermodynamic Analysis of Edible Oil Refinery Operations. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18,2011.
  • Sangotayo, E.O., Waheed, M.A. and Alamu, O.J. Parametric Study of Thermal Performance of Cylindrical Parabolic Trough Solar Collector in Ogbomoso Environs. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18,2011.
  • Babatunde, K. A, Alade, AO., Olabode F.r., and Waheed, M.A. Acid-Catalyzed Production of Biodiesel from Chrysophyllum Albidium Seed Oil. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18,2011.
    72.    Nwaokocha, C.N., Waheed, M.A. and Layeni, AT. Extracting Marine Energy to Solve Nigeria's Energy Crisis. Science, Engineering and Technology Conference (SETCONFERENCE, 2011), held at Osun State University, Osogbo, between March 15 and 18, 2011.
  • Sangotayo, E. O., Waheed, M. A., and Olajide, J. O. Numerical Investigation of Temperature Dependent Properties of Nanofluid in a Cavity, Humboldt-Kollege, Ogbomoso, 2011, July 4 -7, 2011.
  • O. S. Olaoye, M. A. Waheed, G. A Odewole, Importance of Nanotechnology in Solar Drying, Humboldt-Kollege, Ogbomoso, 2011, July 4 -7,2011.
  • Waheed, M. A. and Sangotayo, E. O. (2011). Numerical Investigation of Buoyancy Effect Associated with a continuously Moving Horizontal Plate, Accepted for publication by ASUU Journal.
  • B.O. Bolaji, M.A. Akintunde and T.O. Falade (2011): Comparative Analysis of Performance of Three Ozone-Friendly HFC Refrigerants in a Vapour Compression Refrigerator. Journal of Sustainable Energy and Environment. 2 (2); 61-64, Published by the King Mongkut's University of Technology, Bangkok,     Thailand. Available online at http://www.jseejournal.com/JSEE%2020111JSEE%20Vol%202%20Issue%202/9.%20Comparative%20analysis%20pp.%2061-64.pd
  • 89.    B.O. Bolaji (2011): Exergetic Analysis of Solar Drying Systems. Natural Resources. 2 (2); 92-97. Published by the Scientific Research, Irvine, USA. Available online at http://www.scirp.org/journaliPaperDownload.aspx?paperID=5260
  • B.O. Bolaji (2011): Performance Investigation of Ozone-Friendly R404A and R507 Refrigerants as Alternatives to R22 in a Window Air-Conditioner. Energy and Buildings. 43 (11); 3139-3143, Published by Elsevier, Atlanta, GA, USA, Available online at http://dx.doi:10.1016/j.enbuild.2011.08.011
  • B.O. Bolaji, T.M.A, Olayanju and T.O. Falade (2011): Performance Evaluation of a Solar Wind-Ventilated Cabinet Dryer. The West Indian Journal of Engineering. 33 (1&2): 12-18, Published by the University of the West Indies. Available online at http://sta.uwi.eduleng/wije/vo13301-02 jan20 111documents/SolarWind-VentilatedCabinetDryer.pdf
  • Bolaji, B.O. (2011). Mathematical Modelling and Experimental Investigation of Collector Efficiency of a Thermosyphonic Solar Water Heating System. Analele Universitatii Eftimie Murgu. 18 (3); 55-66, Published by the Eftimie Murgu University of Resita, Romania. Available online at http://anale-ing.uem.ro/20 I1/C8.pdf
  • Musa A.1. & Ismaila S.O. (2011): Student anthropometric data and furniture mismatches in selected institutions in Abeokuta, Ogun state, Nigeria. Theoretical Issues in Ergonomics Science, 1-9, iFirst. Available online at DOI:lO.108011463922X.2011.611272
  • Musa A. I., Ismaila S. 0., Adejuyigbe S. R & Akinyemi O.D. (2011): Ergo-effects of designed school furniture and sitting positions on students' behaviour and musculo- skeletal disorder in Nigerian tertiary institutions. Management Science Letters 1; 331¬334, Published by Growing Science, Ontario, Canada. Available online at www.GrowingScience.comllj.ms1.2011.03.002
  • Waheed, M. A, Odewole, G. A, Alagbe, S. 0., Kuye, S. I. and Ismaila, S. O. (2011). Visualization of Buoyancy Induced Heat Flow in Rectangular Enclosures Filled with Nanofluids Using Heatfunction Formulation Approach, Second African Conference On Computational Mechanics - An International Conference -AfriCOMP11, January 5 - 8,2011, Cape Town
  • Ismaila, S.O., Oriolowo K.T. and Akanbi O.G. (2011): Energy Expenditure Requirements of Bricklaying in South Western Nigeria. Proceedings of Human Factors in Organizational Design and Management-X, Grahamstown, South Africa 4-6 April, 2011, M. Gobel, CJ. Christie, S. Zschernack, A.1. Todd and M. Mattison (Eds.) 11-337-341. Published by Department of Human Kinetics and Ergonomics, Rhodes University, Grahamstown, South Africa.
  • Musa AI., Ismaila, S.O., Adejuyigbe S.B. and Akinyemi O.D. (2011): Ergonomic Evaluation and Design of Tables and Chairs for use in Tertiary Institutions in Nigeria. Proceedings of Human Factors in Organizational Design and Management¬X, Grahamstown, South Africa 4-6 April, 2011, M. Gobel, C.J. Christie, S. Zschernack, AI. Todd and M. Mattison (Eds.) 11-201-206. Published by Department of Human Kinetics and Ergonomics, Rhodes University, Grahamstown, South Africa.
  • Ismaila, S.O., Akanbi O.G., Daniel O. I. Musa A I. and Sanusi H. O. (2011): Ergonomic Evaluation of Welding Workplace. Proceedings of Human Factors in Organizational Design and Management-X, Grahamstown, South Africa 4-6 April, 2011, M. Gobel, C.J. Christie, S. Zschernack, AI. Todd and M. Mattison (Eds.) 1-401-406341. Published by Department of Human Kinetics and Ergonomics, Rhodes University, Grahamstown, South Africa.
  • O.S. Olokode, P.O. Aiyedun, G.O. Oluwadare, Y.T. Oyeleke and W.E. Lee (2011) "Strength Characteristics of Nigerian Quarzitic and Kaolinitic Clays in Wall Tile Composition" Series B, Vol. 10, Number 1 ASSET Journal.117.    O.S. Olokode, O.S. Fakolujo, L.R. Ariyo (2011) "Reality of Made in Nigeria Car" By Journal of Emerging Trends in Engineering & Applied Sciences (JETEAS).
  • Olokode, O.S., P.O. Aiyedun, Oluwadare, G.O., Alamu, O.J., Fakolujo, S.O., W.E. Lee (2011) "The Use of Nigerian Clay in Porcelain Stoneware Formulations" Journal of Emerging Trends in Engineering & Applied Sciences (JETEAS).
  • O.S. Olokode, O.S. Fakolujo, Aiyedun, P.O., S.I. Oloketuyi, Olumuyiwa Awe (2011) "Assessment of Corrosion on Cars in Lagos Metropolis" Journal of Emerging Trends in Engineering & Applied Sciences (JETEAS).
  • O.S. Olokode (2011) "Empirical Model for Estimating the PhysicallMechanical Properties of Clay/Cement Tiles" The Pacific Journal of Science & Technology Vol. 12, Number 1 (Spring).
  • O.S. Olokode, P.O. Aiyedun (2011) "Mineralogical Characteristics of Natural Kaolins from Abeokuta, South-West Nigeria" Pacific Journal of Science and Technology Vol. 12.
  • Olokode O.S., Aiyedun P.O., Oluwadare G.O., Lee W.E. (2011) "Microstructural Development on Fired Nigerian Clay of South-West Nigeria" International Journal of Applied Engineering Research (IJAER), Paper Code 5693.
  • 134.    Kuye, S. I. (2011) - Analysis of the Dynamics and Stability of Viscoelastic Pipes Conveying A Non-Newtonian Fluid. Ph.D. Thesis in the Dept. of Systems Engineering, University of Lagos, Akoka, Nigeria.
  • Adetunji, O.R and Quadri, A.H (2011): Design and Fabrication of an Improved Cassava Grater Pacific Journal of Science and Technology 12(2): pp. 120-129. Published by Akamai University of United States of America. Available on line at http://www.akamaiuniversity.us/PJST.htm
  • Adetunji, O.R, Aiyedun, P.O, Alamu, O.J and Surakat, A.S (2011) Electrochemical properties of metals in cassava fluid Journal of Engineering and Technology Research 3(10): pp.292-297. Published by Academic Journals. Available on line at http/I: www.academicjournals.org/JETR.
  • Adetunji, O. R. and Owoeye, F.T. (2011): Corrosion Resistance of Aluminium Plate in Lime Solution Pacific Journal of Science and Technology 12(1): pp. 56-61. Published by Akamai University of United States of America. Available on line at http://www.akamaiuniversity.us/PJST.htm
  • Adetunji, O.R., AIYEDUN, P.O., Arowolo, T.A and Alamu, O.I (2011) "Characterization of Vacuum Thermally Deposited Aluminum Zinc Nano-Thin Film." Nigerian Materials Congress 2011 (NIMACON 2011), Nov. 21-24, 2011, EMDI, Akure, Nigeria. Presented at the Conference.
  • Adetunji, O.R., P.O. AIYEDUN, T.A Arowolo and 0.1. Alamu (2011) "Corrosion Performance of Aluminium Zinc Alloy coated, steel in Cassava Juice, Maize Pulp and Seawater Solution." Nigerian Materials Congress 2011 (NIMACON 2011), Nov. 21-24, 2011, EMDI, Akure, Nigeria. Presented at the Conference.


2010

  • Aiyedun, P.O., Nwaneto, F.N., Adeleke, AE., and Alamu, O.J. (2010) " Yield Strength Estimation for Stainless Steel using Plain Strain Compression Test. "Australian Journal of Basic and Applied Sciences, Vol. 4, No. 12, pp. 6312-6318. ISSN 1991-8178.
  • ADEJUYIGBE, S. B. and DAHUNSI, O. A (2010) - A Study of Small and Medium Scale Industrial Development in Ondo State, Nigeria. Au Journal of Technology, Assumption University (ABAC), Hun Mak Bangkok, Thailand. - 13(3) pp 186-192 (Jan. 2010). - Foreign Publication.
  • ADEJUYIGBE, S. B. and BOLAJI, B.O. (2010) Problems Militating Against the Effectiveness of Technological Courses in Nigeria. Proceedings of Multi-Disciplinary International Conference. Ghana Institute of Management and Public Administration, Ghana ih - 10th September, 2010, pp. 27-39.and also Published in the Journal of Science and Management, Accra, Ghana, VoLl No 1 August, 2011. Pages 13-16 Foreign Publication.
  • OGBEIDE, S. O., ADEJUYIGBE, S. B. KAREEM B. (2010) Application of Expert System for Raw Material Determination in Cement Industries. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), London 1 (1): 30-35 © Scholarlink Research Institute Journals, 2010 jeteas.scholarlinkresearch.org - Foreign Publication
  • OGBEIDE,S.O., ADEJUYIGBE,S.B. KAREEM B. (2010) An Expert System for Determining Machine Capacity in Cement Industry Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), London 1 (1): 52-59 © Scholarlink Research Institute Journals, 2010 jeteas.scholarlinkresearch.org - Foreign Publication
  • OYELAMI, A.T., ADEJUYIGBE, S.B., WAHEED, M.A. AND OGUNKOYA, A.K. (2010) Performance Evaluation of Blowers of Different ImpellerNane Profiles. Accepted for the Conference Proceedings ofNIMACON 2010.
  • Fadare, D. A., Nkpubre, D.O., Oni, A. 0., Falana, A., Waheed, M. A. and Bamiro, O. A. (2010). Energy and exergy analyses of malt drink production in Nigeria, The International Journal of Energy, vol. 35(12), 5336 - 5346.URL: http://dx.doLorg/10.1016/j.energy.201 0.07.026
  • G. A. Odewole, M. A. Waheed and O. S. Olaoye. (2010). Measurement of Mean Velocity and Reynolds Stress Profiles in a Turbulent Pipe Flow, Science Focus, an International Journal Biological and Physical Sciences, vol. 15(2), pp. 236¬248.
  • Fadare, D. A, Bamiro, O. A, Nkpubre, D.O., Oni, A. O. and Waheed, M.A. (2010). Energy Analysis of Malt Drink Prfoduction in Nigeria, Proceedings of NIlE 2010 Conference, pp. 96 – 103
  • Babatunde, K. A, Alade, A 0., Waheed, M. A., Amuda, O. S. (2010). Determination of Biodiesel Blends Suitable for Automobile Engines from African Star Apple Seed Oil (ASASO), Humboldt~Kolleg International Conference, Ogbomoso, January 11 - 14, 2010, pp. 18.
  • Olaoye, S.O., Waheed, M. A. (2010). Experimental Investigation of the Effects of Geometry on the Performance of Savonius Wind Turbine, Humboldt-Kolleg International Conference, Ogbomoso, January 11 - 14, 2010, pp. 68.
  • Waheed, M. A., Ladokun, L. L. (2010). A Study of the Effects of Some Local Weather Parameters on the Thermal Performance of a Solar Concentrating Collector, Humboldt-Kolleg International Conference, Ogbomoso, January 11 -14,2010, pp. 69.
  • Waheed, M. A., Fadare, D. A, Oni, A 0., Sulaiman, M. A (2010). Simulation of the Household Energy and Exergy Consumption Trend, Humboldt-Kolleg International Conference, Ogbomoso, January 11 - 14,2010, pp. 70.
  • Fadare, D. A, Oni, A. O. and Waheed, M. A. (2010). Exergetic analysis of atmospheric distillation plant: a case study of WRPC refinery, Proceedings of Faculty of Technology International Conference 2010 held at Conference Centre and Guest Houses Ltd, Obafemi Awolowo University, Ile-Ife between September 5 - 9,2010, pp. 143 - 151.
  • Waheed, M. A., Lucas, E.B., Durowoju, M.O. (2010), Numerical Characteristion of the Pores in Heat Treated AL-20%WTZN, Proceedings of the First International Conference on Engineering and Technology Research, 28 - 30 September, pp. 58 -63.
  • Oyelami A.T., Adejuyigbe S.B., Waheed M.A. and Ogunkoya AK. (2010). Performance Evaluation of Blowers of Different Impeller/Vane Profiles (Accepted for the Conference Proceedings of the 9th Nigerian Materials Congress (NIMACON)B.O. Bolaji (2010): Experimental Study ofR152a to Replace R12 and R134a in a Domestic Refrigerator. Energy. 35 (9); 3793-3798. Published by Elsevier, Atlanta, GA, USA. Available online at www.journaltocs.hw.ac.uk/articleHomePage.php?id=2143496&userID=
  • B.O. Bolaji (2010): Experimental Analysis of Reciprocating Compressor Performance with Eco-Friendly Refrigerants. Journal of Power and Energy. 224 (6); 781-786, Published by the Institution of Mechanical Engineers, UK. Available online http://journals.pepublishing.com/content/65712062542p5754/fulltext.pdf.
  • B.O. Bolaji, G.A. Bolaji and S.O. Ismaila (2010): Performance Evaluation ofa Locally Developed Domestic Water Filter. International Journal of Environmental Studies. 67 (5); 763-771, Published by Taylor and Francis,
    UK http://www.informaworld.comlsmpp/content~content=a928049146~db=all~jumptype=rss.
  • B.O. Bolaji, M.A. Akintunde and T.O. Falade (2010): Theoretical Investigation of the Performance of Some Environment-Friendly Refrigerants in a Sub-cooling Heat Exchanger Refrigerator. Journal of Science and Technology. 30 (3); 101¬108, Published by the Kwame Nkrumah University of Science and Technology, Kumasi, Ghana, Available online at http://www.ajol.info/index. php/j ust! article/view /64628/52403  B.O. Bolaji (2010): The Dehydrative Capacity of Solar Rice Dryer for Rural Application in Nigeria. Ife Journal of Technology. 19 (2); 42-47, Published by the Obafemi Awolowo University, Ile-Ife, Nigeria. Available online at http://ijtonline.org/index.php?journal=ijt&page=artic1e&op=view&path%5B%5D=12
  • B.O. Bolaji (2010): Performance Analysis ofR12 Alternatives in Adiabatic Capillary Tube of a Vapour Compression Refrigeration System. Engineering Review, 30 (2); 83-90, Published by the University of Rijeka, Croatia. Available online at http://hrcak.srce.hr/file/95454
  • Ismaila S.O., O.G. Akanbi & S.O. Oderinu (2010): Anthropometric Survey and Appraisal of Furniture for Nigerian Primary School Pupils. e-Journal of Science and Technology. 4 (5); 29-36, Published by Technological Education Institute, Athens, Greece. Available online at www.e-jstteiath.grlissue17/Ismaila17.pdf
  • Ismaila S.O. & O.E.Charles-Owaba (2010): A Review of Manual Load Lifting Models. Leonardo Journal of Sciences. 16(9); 47-58, Published by Academic Direct Publishing House (Technical University ofCluj-Napoca, Romania). Available online at www.l;s.academicdirect.org/A16/047 058.pdf
  • Ismaila S.O., O.G. Akanbi, N.O. Adekunle, O.R. Adetunji & S.1. Kuye (2010): An Ergonomics Assessment of Passenger Seats in Buses in South Western Nigeria. Sigurnost. 52(4); 329-334, Published by Institute of Safety Research and Development, Croatia. Available at www.hrcak.srce.hr/index.php?show=toc&id.broj=4991
  • Ismaila, S.O., O.E. Charles-Owaba, OJ. Alamu & O.G. Akanbi (2010): Estimating Load on the Spine using Spinal Shrinkage. Leonardo Journal of Sciences. 16(9); 117-124. Published by AcademicDirect Publishing House (Technical University of Cluj-Napoca, Romania). Available online at  www.l;s.academicdirect.org/A16/117 124.pdf
  • B.O. Bolaji, G.A Bolaji & S.O. Ismaila (2010): Performance evaluation a locally developed domestic drinking water filter. International Journal of Environmental Studies.67 (5);763-771, Published by Taylor and Francis. Available online at dx.doi.orgll 0.1 080100207233.201 0.5141 07
  • Ismaila, S.O. (2010): Ergonomics Awareness in Nigeria. Australian Journal of Basic and Applied Sciences. 4 (5); 731-734, Published by International Network for Scientific Information. Available online at www.insipub.com/ajbas/201 0/731- 734.pdf
  • Ismaila, S.O. & O.G. Akanbi (2010): Study on the Use of Seat Belt by Nigerian Drivers. Australian Journal of Basic and Applied Sciences. 4 (3); 494-497, Published by International Network for Scientific Information. Available online at www.insipub.com/ajbas/201 0/494-497.pdf
  • Ismaila, S.O., Odetokun, B.D. and Bolaji, B.D. (2010). A Unit for Reducing Vehicular Emissions in Petrol Engines. Proceedings International Conference of the Nigerian Society of Engineers, Abuja, Nigeria. 6th _10th December, 2010, pp. 1-7.
  • O.S. Olokode, P.O. Aiyedun, S.I. Kuye, N.D. Adekunle and W.E. Lee (2010) "Evaluation of Clay Mineral Deposit in Abeokuta, South-West Nigeria" Series B, Volume 9, Number 2.
  • O.S. Olokode, P.O. Aiyedun, G.O. Oluwadare, OJ. Alamu, S.D. Fakolujo and W.E. Lee (2010) "Characterization of Ajebo Clay in South West, Nigeria" Series B, Vol. 9, Number 2, ASSET Journal.
  • O.S. Olokode, Awe Olumuyiwa and Fakolujo, O.S. (2010) "Effectiveness of Edible Palm Oil as a Quenchant for Hardening of Medium Plain Carbon Steel" Industrial Maintenance Journal (IMJ) Serial 12, Rain Edition.
  • Kuye, S. I. and Faleti, S. I. (2010): Influence of Electrode Diameter on the Corrosion Behaviour of Welded Mild Steel. ASSET, Series B Vol. 9, No.1.
  • Ismaila, S. 0., Akanbi, O. G., Adekunle, O. R., Adetunji, O. R., Kuye, S. I. (2010): An Ergonomics Assessment of Locally Fabricated_Passengers' Seats in Buses in South Western Nigeria. Sigurnost, Zagreb.
  • O.S. Olokode, P.O. Aiyedun, S.1. Kuye, N.O. Adekunle and W.E. Lee (2010) "Evaluation of Clay Mineral Deposit in Abeokuta, South-West Nigeria" Series B, Volume 9, Number 2.
  • Olunloyo, V. O. S., Osheku, C. A. and Kuye S. I. (2010): Vibration and Stability Behaviour of Sandwiched Viscoelastic Pipes Conveying a Non-Newtonian Fluid. Proceedings of OMAE 2010, ASME 2£/" International Conference on Ocean, Offshore and Arctic Engineering, Shanghai, China. June 2010. OMAE 2010 - 20065.
  • Adetunji, O.R. and Adewoye, O. (2010): Mechanical Properties of Mild Steel Rod in Cassava Fluid Pacific Journal of Science and Technology, 11(2): pp. 22-26. Published by Akamai University of United States of America. Available on line at http://www.akamaiuniversity.us/PJST.htm
  • Adetunji, O.R. (2010): Optimizing Hot Dip Galvanizing Operations of Steel Sheets for better Quality Journal of Natural Science Engineering & Technology, Vol 9(2) : 99-105. Available on line at http://www.unaab.edu.ng/journal.
  • Amusan, lA, Olayinka, AS., Nwambo, YP., Alayande, S.O., Ojuh, O.D., James, C.C., Ibiyemi, A and Adetunji, O.R. (2010): Electrical Characterisation of Vacuum Thermally Deposited Aluminium Thin Film.Research Journal of Applied Sciences pp. 96-100. Published by Medwell Journals.
  • Ismaila, S.O., Akanbi, O.G., Adekunle, N.O., Adetunji, O.R. and Kuye, S.l. (2010): Ergonomics Assessments of Locally Fabricated Passenger Seats in Buses in South Western Nigeria.pp. Sigurnost (Safety).pp. 329-334. Published by Institute of Safety Research and Development, Croatia.
  • O.S Olokode, P. O.Aiyedun, .I. Kuye, N .0. Adekunle and W. E. Lee (2010) Evaluation of Clay Mineral Deposit in Abeokuta, South - West, Nigeria ,Series B,

 

Civil Engineering Publication Abstracts

Print PDF


2012


2011

  • Abiola, D.S. (2011). Developing Pavement Roughness Index Model Using Artificial Neural Network. Journal of Natural Sciences, Engineering and Technology (ASSETS) FUNAAB (Letter of Acceptance dated January 26th 2012.)
  • Adewuyi, A.P. and Wu, l.S., (2011) Modal macro-strain flexibility methods for damage localization in flexural structures using long-gage FBG sensors, Structural Control and Health Monitoring, Vol. 18, No.3, pp. 341-360 - John Wiley - USA. Wiley Online Library (wileyonlinelibrary.com). 001: 10.1002/stc.377.
  • Adewuyi, A.P. and Wu, l.S., Vibration-based damage localization in flexural structures using normalized modal macrostrain techniques from limited measurements, 2011, Computer-Aided Civil and Infrastructure Engineering, Vol. 26, No.3, pp. 154-172. - Wiley-Blockwell¬USA. 001: 10.1111/j.1467-8667.2010.00682.x
  • Wu, l.S., Adewuyi, A.P. and Xue S.-T. Identification of Damage In Reinforced Concrete Columns Under Progressive Seismic Excitation Stages, 2011, Journal of Earthquake and Tsunami, Vol. 5, No.2, pp. 151-165. World Scientific Journals Japan. 001: 10.1142/S1793431111001030.
  • Adewuyi, A. P. and Franklin, S. O. Analytical investigation of prestressed concrete structures incorporating combined post-tensioned and post-compressed reinforcements. 2011, ARPN Journal of Engineering and Applied Sciences, Vol. 6, No.12, pp. 55-61. Asian Research Publishing Network (ARPN).
  • Badejo A. A. Coker A. O. and Sridhar M. K. C. (2011) Tertiary Hospital Wastewater Treatment using Reed Bed Technology Planted with Vetiveria nigritana Benth and Phragmites karka Retz. Proceedings of the Environmental Management Conference. Federal University of Agriculture, Abeokuta, Nigeria, pg 497-503.
  • Badejo A. A. and Oyedele V. O. (2011) Constructed Wetland System vegetated with Phragmites Karka in the treatment of Dye-Rich wastewater. Presented at the Engineering and Technology Conference. Accepted for publication in the proceeding of the College of Science, Engineering and Technology conference. Osun State University. Nigeria.
  • Adekunle, I.M., A.A. Adekunle. , A.K. Akintokun, P. Akintoku and T.A. Arowolo, (2011). Recycling of organic wastes through composting for land applications: a Nigerian experience. Waste Management & Research, 29 (6): 582 - 593. Publisher: International Waste Management Association, Netherlands.
  • Adekunle., A.A. and Adewumi, J.K. (2011) Heavy Metals in urban runoff of Lagos major streets. Journal of Sanitation and Environment. 8 (1) 6-14. Publisher: Water and Sanitation Group, USA.
  • Akinyele, J.e. (2011)."Comparism of Computer based yield line theory with elastic theory and finite element methods for solid slabs". International Journal of Engineering and Technology. Vol. 3 (1), pp 1-5. (India)
  • Akinyele, J.e. and Ajagbe, W.O.(2011). "Prevention of building collapse as a result of changes in structural members: case study of a factory in Ibadan". International Journal of Environmental Sciences, Volume 7, Number 3. Pp 90-95. (Ghana)and Organic Recycling, 46: Pp.59-63. (USA).
  • Akinyele, J.e. and Alade, GA (2011)."Effective utilization of bituminous asphalts waste as aggregate in concrete". ASSET journal, series B, volume 10, Number 1, University of Agriculture, Abeokuta. Nigeria. (in press).
  • Akinyele, J.e. and Alade, GA (2011). "The effective analytical methods in the analysis of civil engineering structures". Proceedings of science engineering and technology conference, as un state University, Oshogbo, Nigeria. March 15-18, 2011. 26.     Abiola, O.S. (2011). Developing Pavement Roughness Index Model Using Artificial Neural Network. Journal of Natural Sciences, Engineering and Technology (ASSETS) FUNAAB (Letter of Acceptance dated January 26th 2012.)
  • Abiola, O. S (2011). Use of Neural Networks for Pavement Condition Rating. Nigerian Institute of Industrial Engineers Conference proc University oj Ibadan, Nigerian Institute of Industrial Engineers, pp 79-88.
  • Owolabi, O.A and Abiola, O.S. (2011). Development of Priority Index Assessment Model for Road Pavements in Nigeria. proc. of the 8th International Conference on Management Pavement Assets (paper ICMPA 093 ), Chile. 35.     Abiola, D. S (2011). Use of Neural Networks for Pavement Condition Rating. Nigerian Institute of Industrial Engineers Conference proc University oj Ibadan, Nigerian Institute of Industrial Engineers, pp 79-88.
  • Owolabi, O.A and Abiola, D.S. (2011). Development of Priority Index Assessment Model for Road Pavements in Nigeria. proc. of the 8th International Conference on Management Pavement Assets (paper ICMPA 093), Chile.
  • Awokola, O.S. (2011): Derivation of Equations To Predict Shear Stress And Erosion Rate of    Gully Erosion Site In Ogun State, South Western, Nigeria. ASSET Series B
  • Adeofun C.O., Oyedepo J.A. and Awokola, O.S. (2011) Environmental Impact Assessment   of Sand dredging and land Reclamation in Lagos Coastal Areas. Nigerian Journal Science


2010

  • Akinyele, J.E. (2010). "Computer application of Yield line theory in the analysis of solid slabs". Conference proceedings, of structural engineering, mechanics and computing, (SEMC 2010), University of Cape-Town, South Africa,,, Sept. 6 - 8, 2010.

Electrical and Electronics Engineering Publication Abstracts

Print PDF


2012

  • Oghogho, I. K , Wara, S.T.(2012), A. Ali,  D. Odikayor. VoIPVs GSM Technology: The way of the future in Telecommunication, In Disruptive Technologies, Innovation and Global Redesign: Emerging Implications, IGI Global Publishers, Hersley 17033, USA
  • D. Odikayor, A. Ali, Wara, S.T.,Oghogho, I. K. ,(2012), Dual sim phones in Nigeria: A Disruptive Technology,  In  Disruptive Technologies, Innovation and Global Redesign: Emerging Implications, IGI Global Publishers, Hersley 17033, USA, 462 – 469. ISBN 978 – 1 4666 – 0134 – 5 (hbk), ISBN 978 – 1 – 4666 – 0135 – 2 (ebook), ISBN 978 – 1 – 4666 – 0136 – 9 (print & perpetual access). http://www.igi-global.com
  • Wara, S.T. (2012). Promoting Nigeria’s Energy Efficiency DSM Programme Through Energy Conservation. An article published in The Guardian Newspaper, Friday, February 3, 2012: pg 43.
  • Wara, S.T. and Okoro, O.I. (2012) Promoting Nigeria’s Energy Efficiency DSM Programme Through Renewable/Cogeneration – Wind Energy Prospects. An article published in The Guardian Newspaper, Friday, February 6, 2012: pg 56.
  • Akinboro, F.G, Adejumobi, I.A., Makinde V. (2012), “Solar Energy Installation in Nigeria: Observations, Prospect, Problems and Solution”, Transnational Journal of Science and Technolgy, Kocani, Macedonia, Vol.2 No.4, pp73-84.
  • Adebayo I.G, Adejumobi I. A and Adepoju, G.A. (2012), “Application of Load Tap-Changing Transformer(LTCT)  to the Optimal Economic Dispatch of  Generation to the Nigerian 330kV Grid System”, International  Journal of Emerging Technologies in Science and Engineering (IJETSE), Canada, Vol.5,No.3,pp.40-50.
  • Amusa K. A. and Nwoye E.O. (2012), “Novel Algorithm for Decoding Redundant Residue Number System Codes”, International Journal for Research and Reviews in Applied Sciences (IJRRAS), Pakistan, Vol. 12 (1), July, 2012, pp. 159-163
  • Nuga O. O., and Amusa K. A., (2012) “Framework for Asset Location Using Aplicom-12 Module”, International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 8, October, 2012
  • Amusa K. A., Nuga O. O., and Adetomi A. A., “Design and Construction of Automated Barrier for Car Park Gates”, International Journal of Emerging Technology and Advanced Engineering Website: www.ijetae.com (ISSN 2250-2459, Volume 2, Issue 11, November 2012)
  • Nuga O. O., and Amusa K. A., (2012) “Framework for Asset Location Using Aplicom-12 Module”, International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 8, October, 2012
  • Amusa K. A., Nuga O. O., and Adetomi A. A., “Design and Construction of Automated Barrier for Car Park Gates”, International Journal of Emerging Technology and Advanced Engineering Website: www.ijetae.com  (ISSN 2250-2459, Volume 2, Issue 11, November 2012)


2011

  • I.R. Ilaboya, S.T. Wara, A.A. Erameh, F.F. Asekhame and O.O. Ighodaro (2011), “Energy and the Environment; Analysis of the Causes, Consequences and Remedies to Deforestation and Global Warming”, The Nigerian Engineer, 42 – 52, ISSN 0331 – 5967
  • Wara, S.T.(2011). The Engineer, Society and Sustainable National Development, Igbinedion University Okada, University Lecture Series, Igbinedion University Press Ltd.
  • Wara, S.T. (2011). The Engineer, Society and Sustainable National Development (1) – (4). . An article published in The Guardian Newspaper, Friday, February 4, 2011 (1): pg 43, Friday, February 11, 2011(2): pg 35, Monday, February 14, 2011 (3): pg 60 – 61, Thursday, February 24, 2011 (4): pg 85.
  • Wara, S.T and Okoro, O.I (2011). Promoting Nigeria’s Energy Efficiency DSM Programme in the Domestic Sector III: Behavioural Change Campaign (1) AND (2). . An article published in The Guardian Newspaper, Wednesday, May 11, 2011(1): pg: 62, Friday, May 20, 2011(2): pg 44.
  • Wara, S.T and Okoro, O.I. (2011). Promoting Nigeria’s Energy Efficiency DSM Programme in the Domestic Sector. . An article published in The Guardian Newspaper, Friday, May 20, 2011: pg 45.
  • Wara, S.T (2011). An Energy Management, Efficiency, Conservation, Security Technique (1) and (2). An article published in The Guardian Newspaper, Monday, April 4, 2011(1): pg 70 – 71, Tuesday, April 5, 2011(2): pg 88 – 89.
  • S.T. Wara et al(2011), Energy Efficiency Options In A Power Crisis Ridden Economy: Prospects And Challenges For Nigeria, The Maiden Edition Of The Eduwatch Consults and Research Centre, (ECRC), International Conference on Scholars and Practitioners in World Politics 2011, August 22nd – 25th 2011, NICON Luxury, Area11, Garki, Abuja, Nigeria
  • S.T. Wara et al(2011), Combating CO2 Emission And Global Warming Through Energy Efficient Retrofitted Home Models, In: Proceedings of the 19th International Conference on the Domestic Use of Energy, Cape Town, South Africa, ISBN 978 – 0 – 9814311 – 0 – 9. Available online at http://active.cput.ac.za/energy/web/due/papers/due%20cd%202011/Conference%20Presentations/Paper/20.Wara%20ST.pdf
  • Adejumobi, I.A, Oyagbinrin, S.G, Akinboro, F.G. and Olajide, M.B, (2011), “Hybrid Solar and Wind Power: An Essential for Information Communication Technology Infrastructure and People in Rural Communities”, International Journal of Research and Reviews in   Applied Sciences. Pakistan (IJRRAS), Vol. 9 Issues 1, pp130-138
  • Yusuf, L.O., Folorunso, O., Akinwale, A.T. and Adejumobi, I.A. (2011), “A Framework Costing Service-Oriented Architecture (SOA) Project Using Work Breakdown Structure (WBS) Approach” Global Journal of Computer Science and Technology (GJCST), Vol. 11Issues 15, pp.25-47, Publisher Global Journal Inc. (USA), http://www.GlobalJournals.org
  • Adejumobi, I.A and Opeodu, F.A, (2011), “Minimizing Power Distribution System Active Power Loss Using Heuristic Network Reconfiguration Technique”, International   Journal of Emerging Technologies in Science and Engineering (IJETSE), 4(1):55-61, Canada. (http://www.ijetse.com)
  • Adejumobi I.A. and Opeodu F.A. (2011), “Optimal Conductor Sizing and Capacitor Placement for Power Loss Reduction on Distribution Systems”, Lautech Journal of Engineering and Technology. Faculty of Engineering and Technology, University of Technology, Ogbomoso (Letter of Acceptance, April 7, 2011).


2010



Agricultural Engineering Publication Abstracts

Print PDF


2012

  • Musa, J.J., J.K. Adewumi and J. Ohu (2013). “Comparing Developed Runoff Coefficients for Some Selected Soils of GidanKwano with Existing Values”, International Journal of Basics and Applied Sciences. Vol. 01, No 03, Jan. 2013. Pp 473-469. P-ISSN: 2301-4458; E-ISSN: 2301-8038.
  • *fSamuel, O.D., and O.U Dairo.  2012.  A Critical Review of In-situ Trans-esterification Process for Biodiesel Production. Pacific Journal of Science and Technology. Vol.13(2):72-79.
  • *fDairo, O.U and T. M. A Olayanju. 2012. Convective Thin-layer drying characteristics of sesame seed. International Journal of Engineering Research in Africa Vol. 7 (2012) pp 55-62. doi:10.4028/www.scientific.net/JERA.7.55
  • *Samuel, O.D., O.U Dairo, and O.O. Adama. 2012. Physical properties of castor bean seed relevant to mechanical processing. Journal of Engineering and Environmental Studies. Vol. 3(2):101-105pp.
  • *fAzodo, A.P., S.B. Adejuyigbe, M.A. Waheed, and O.U. Dairo. 2012. Computer Aided Design of Mechanical Clutch. Pacific Journal of Science and Technology. Vol .13(2):39-56.
  • *fDairo, O.U , Olayanju, T. M. A., and Amusan O. 2012. Effect of initial catalyst amount on production of bio-diesel from jathropha curcas seed using in-situ technique. Transnational Journal of Science and Technology.Vol 2(6): 23-34
  • *Dairo, O.U, Olayanju, T.M.A. and Amusan, O. 2012. Influence of Catalyst Amount and Alcohol-seed ratio on the production of bio-diesel from jathropha seed using in-situ technique. LAUJET: Ladoke Akintola University. LAUTEC. Nigeria.   In Press
  • *Shittu, T. A., O Ogunjinmi, I. A. Ola, O. P Sobukola, O. M. Sogunle, T. M Olayanju, Dairo, O.U. 2012. Optimization of a convective drying process for producing starch-albumen powder as coating material in fried foods. 18th International Drying Symposium (IDS 2012) Xiamen, China, 11-15 November 2012
  • Musa, J.J., J.K. Adewumi and J. Ohu (2012). “Comparing Developed Manning Coefficients for Some Selected Soils of GidanKwano with Existing Values”, The Electronic Journal of Geotechnical Engineering (EJGE), Vol. 17 (2012), Bund. V. ISSN 1089-3032. Pp 2999 – 3008.
  • Adekunle, A.A., J.K. Adewumi, N.J. Bello and J.O. Akinyemi (2012). “Stromwater Characteristics on 3rd Mainland Bridge Lagos, Nigeria”.Journal of Applied Technology in Environmental Sanitation.Vol. 2, No. 2.Pp.
  • Martins, O.O., S.B. Adejuyigbe, M.A. Waheed and J.K. Adewumi (2012). “Computerization of Production Progress and Control of Small Scale Bottled Water Industry in Nigeria”. Paper Presented in The Nigeria Society of Engineer’s Conference Tagged Strategies for Promotion of Sustainable Driven Economy in Nigeria. HARMONY 2012. Kwara Hotel, Ilorin. Kwara State.
  • Adewumi B.A, 2012. Agro-based alternatives to petroleum economy. In: Building a non-oil export economy for Nigeria: The potential of value-added products from agricultural residues. Book Project of the Alexander von Humboldt Foundation published by Cuvillier Verlag Gottingen, Germany. Pp 1-8.
  • Adewumi, B. A. 2012. Transformation from field to food materials: Agro-food process engineering approach. 36th Inaugural Lecture Series of the Federal University of Agriculture, Abeokuta, Nigeria. Pp 126 - 106.
  • Ikenwiwe, N. B., Balogun, E. A., Adewumi, B. A., Otubusin, S. o., Ozoje, M. O., Soaja, J. O., Bamidele, N. A and Adeoye, A. A. 2012. Effect of Terminalia suparba on fecundity and latency period of Clarias gariepinus broodstocks. International Journal of fisheries and Aquacultural Sciences 2: 27 – 33.22.
  • Ogedengbe, T.S., Adejuyigbe, S.B., Ismaila, S.O., Adewumi, B.A.,  and Ali, D.M. (2012). Computer Aided Plant Layout Development for an Aluminum Product Factory. The Pacific Journal of Science and Technology. 13 (1): 358 – 371. http://www.akamaiuniversity.us/PJST13_1_358.pdf.37.
  • *fDairo, O.U and T. M. A Olayanju. 2012. Convective Thin-layer drying characteristics of sesame seed. International Journal of Engineering Research in Africa Vol. 7 (2012) pp 55-62. doi:10.4028/www.scientific.net/JERA.7.55
  • *fDairo, O.U , Olayanju, T. M. A., and Amusan O. 2012. Effect of initial catalyst amount on production of bio-diesel from jathropha curcas seed using in-situ technique. Transnational Journal of Science and Technology.Vol 2(6): 23-34
  • Adisa, A. F., Ndirika, V.I.O, Yiljep, Y.D. and Mohammed, U.S. 2012. Field Performance Evaluation of a Grain Stripper for Rice Harvesting in Nigeria. Transnational Journal of Science and Technology (TJST), Republic of Macedonia. Vol. 2, No. 2:p 93- 107.
  • Adisa, A. F. 2012. Development and Performance Evaluation of Pedestrian Controlled Rice Stripper Harvester. Journal of Applied Agricultural Research (JAAR), Abuja, Nigeria. Vol.4, No.1: p 43-51.
  • Adisa, A. F. 2012. Appropriate Management and Operational Planning Technique for Mechanized Soybean and Maize production in Nigeria.  Journal of Science, Technology & Mathematics Education (JOSTMED). Federal University of Technology, Minna, Nigeria.Vol.8 No. 2: p46-53.
  • Adisa, A.F., Ndirika V.I.O., Yiljep Y.D. and Mohammed U.S. 2012. Determination of Optimum  Operational Conditions of a Grain Stripper for Rice Harvesting in Nigeria. International Journal of Engineering and Technology (IJET), U.K., vol.2, No. 7: p1290-1300.
  • Adisa, A. F. 2012. Effects of Stripper Forward Speed on Header Losses and Harvester Efficiency of a Developed Self Propelled Grain Harvester. Research Journal in Engineering and Applied Sciences (RJEAS), USA. Accepted in May 2012.
  • Adisa, A. F. and Inns, F. M. 2012. Design and Calibration of Epicyclic Gear Transmission Dynamometer for Rural Use. International Journal of Engineering and Technology (IJET- IJENS) ISSN: 2077-1185. Vol:12 Issue: 04. UK. Accepted in August 2012.
  • Adisa, A.F. 2012. Effect of Stripper Peripheral Speeds on Grain Purity, Field Capacity and Field Efficiency of a Developed Self Propelled Stripping Harvester. Ozean Journal of Applied Sciences (OJAS), Turkey. Accepted in September 2012.
  • Adisa, A.F. 2012. Harvest loss estimation for rice grain harvester. National Conference on Science, Technology and Innovation Management in Nigeria. 2ND Professor Bart Nnaji Biennial Lecture, Enugu, Nigeria.  Page 68- 75.


2011

  • Adewumi, J.K., Olufayo, A.A. and T.J. Oyelaja. (2011): Crop Water Use of Cowpea (VignaUnguiculata) Under Deficit Irrigation in a Controlled Environment. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS).  2011. Published by the Scholarlink Resource Centre Limited, UK. http://www.scholarlinkresearch.org.
  • Musa, J.J., J.K. Adewumi, A.P. Adeoye, I.H. Mustapha and E.S. Adebayo (2011). Physicochemical Assessment of Groundwater as a Source of Domestic Water Use in Some Selected Settlements in Minna, Niger State.The IUP Journal of Science & Technology, Vol. 7, No. 2, 2011.
  • Musa, J.J., Ode, O. G; Anijofor, SC and Adewumi, JK. (2011). “Quality Evaluation of Household wastewater for irrigation”.Journal of Applied Sciences & Environmental Management (JASEM). An International Journal Published by the World Bank No. ISSN – 1119 – 8362. (2011). http://www.ajol.info/jasem.(Accepted 15th April, 2011).
  • Adewumi J.K., Sobowale, A, and Kolawole, A. (2011). Rain water harvesting and farming system productivity in drought prone areas of Nigeria. European Journal Of Social Science. Vol. 42. (EJSS) www.http://eurojournals.com/1htm . 2011.
  • Musa, J.J.,J.K. Adewumi, J. Ohu and G.A. Bolaji (2011). “Seasonality Effect of Infiltration Rates of some Selected Soil Types of Soilin North Central Area of Nigeria”. Journal of Biodiversity and Ecological Sciences (JBES).No.1 Issue 4. Pp. 342 – 351. ISSN: 2008-9287. Fall 2011 JBES. This e-mail address is being protected from spambots. You need JavaScript enabled to view it
  • Dada, P.O.O., Salako, F.K. and Adewumi, J.K. (2011).“Maize Root Characterization Using Image Analysis as Affected by Topsoil Removal and Soil Strength”. Transnational Journal of Science and Technology. March edition, Vol. 2, No 2. Pp. 80-92.
  • Sobowale, A. and Olayanju, T.M.A. (2011). Student Information Handbook, Department of Agricultural Engineering (B.A. Adewumi ed.), University of Agriculture, Abeokuta, Nigeria. 75pp. Nigeria
  • A. Sobowale, J.K. Adewumi, O.S. Awokola O.A. Bamgboye , D. Bashir and A.N. Egbulem (2011). Towards Integrated Water Resources Management in South West Nigeria: The Role of CBIs. Proceedings of the 2nd National Water and Sanitation Conference, NWRI, Kaduna; pp302-309. Nigeria.
  • Samuel, O. D, M. A., Waheed, and O.U Dairo.  2011. Sustainable Biodiesel Development Strategies in Fossil-Driven Economy - Nigeria.  In: University of Lagos 7th Annual Research Conference & Fair, 19th 21st October 2011.  Book of Abstract. 26pp
  • Sobayo, R. A., Oso, A. O., Fafiolu, A. O, Aderinboye, R. Y., Jegede, A. V, Dairo, O.U., Iyerimah, R.B. 2011.  Growth response and Apparent Nutrient Digestability of Broiler Chicken fed diet containing ethanol cum lime treated castor oil seed (Ricinus cummunis, L) meal.  Proceedings of the 36th Annual conference of Nigeria Society for Animal Production. 13th -16th March 2011. Ed. Adeniji A.A, Olatunji E.A and Gana, E.S. 34 – 37pp.
  • Aderinlewo A. A. and Raji O. A. (2011).  Effect of variety and moisture content on aerodynamic properties of four Nigerian cowpea varieties. ASSET International Journal, Vol 10(1)
  • Dairo, O.U, T.M.A., Olayanju, E.S.A., Ajisegiri, S.O. Awonorin, and O.J Alamu, 2011. Influence of Catalyst Amount and Alcohol-seed ratio on the production of bio-diesel from raw castor oil bean seed using in-situ technique. LAUJET: Ladoke Akintola University. LAUTEC. Nigeria.   Vol 6 (2) : 45-52pp.
  • Dairo, O.U, T.M.A., Olayanju, E.S.A., Ajisegiri, S.O. Awonorin, and O.J Alamu, 2011.  Effect of Temperature and Percentage of Initial catalyst on the in-situ production of biodiesel from castor oil bean seed using response surface methodology.  ASSET: An International Journal. University of Agriculture, Abeokuta. UNAAB Series B. Vol. 10 (1):  In Press
  • Dairo, O.U, T.M.A., Olayanju, E.S.A., Ajisegiri, S.O. Awonorin, and O.J Alamu, 2011. Influence of Initial Catalyst quantity and reaction time on in-situ production of biodiesel from castor oil bean seed using response surface methodology.  ASSET: An International Journal. University of Agriculture, Abeokuta. UNAAB  Series B. Vol. 10 (1):  In Press
  • Adewumi, J.K., K.F. Omotayo and I.O. Oladipo (2011). “Climatic Variability and Water Resources Development: A case study of Rivers Ogbese and Owena” In: Water and Sanitation Sector Reform: Empowering LGAs in Achieving National Development Objectives and the MDGs Targets. Proceeding of the 2nd National Water and Sanitation Conference, NWRI, Kaduna, 23RD – 25TH March, 2011.
  • Oladipo, I.O., K.F. Omotayo and Adewumi, J.K. (2011). “Runoff Catching: A Mechanism for Sustainable Ground Water Recharge”. In: Water and Sanitation Sector Reform: Empowering LGAs in Achieving National Development Objectives and the MDGs Targets. Proceeding of the 2nd National Water and Sanitation Conference, NWRI, Kaduna, 23RD – 25TH March, 2011.
  • Ahmed, S.D., A.K. Ndahi, J.K. Adewumi and S. Dauda. (2011)."Rural Water Supply and Sanitation in Nigeria: The Need for Scaling up Services”. In: Water and Sanitation Sector Reform: Empowering LGAs in Achieving National Development Objectives and the MDGs Targets. Proceeding of the 2nd National Water and Sanitation Conference, NWRI, Kaduna, 23RD – 25TH March, 2011.
  • Adekunle, A.A. and J.K. Adewumi. (2011).”The Challenge of Meeting Capacity Building in the Local Government Water Supply”. In: Water and Sanitation Sector Reform: Empowering LGAs in Achieving National Development Objectives and the MDGs Targets. Proceeding of the 2nd National Water and Sanitation Conference, NWRI, Kaduna, 23RD – 25TH March, 2011.
  • Sobowale, A., J.K. Adewumi, O.S. Awokola, O.A. Bamigboye, D. Bashir and A.N. Egbulem (2011). “Towards Integrated Water Resources Management in South West Nigeria: The role of Capacity Building Institutions (CBIs)". In: Water and Sanitation Sector Reform: Empowering LGAs in Achieving National Development Objectives and the MDGs Targets. Proceeding of the 2nd National Water and Sanitation Conference, NWRI, Kaduna, 23RD – 25TH March, 2011.
  • Adewumi B.A, 2011. The Roles of Science and Technology in Solving the Problem of Food Insecurity. Journal of Food Science & hospitality. 2 (1): 1-10.
  • Lawson, O. S., Adewumi B.A, Olayanju, T. M. A., and Awonarin, S. O. 2011. Prospect and challenges of extrusion technology in oil seed processing. Journal of Food Science & hospitality. 2 (1): 25-35.
  • Adewumi, B. A. (2011). Aerodynamics and particle dynamics: Applications in grain fractionation and classification.  International Journal of Sciences, USA.
  • Adewumi, B. A, Sathyendra Rao, B. V., Kiran Kumar, N. L.  and Ventakrishnan, L. (2011). Development of a cross flow classifier test rig. International Journal of Sciences, USA.
  • Adewumi B. A, 2011. Local raw material content development and rapid national industrialization: cluster and triple helix concept in the Nigerian context. Paper presented at the Techno-Expo organized by Raw Material Research Council, Abuja, Nigeria held on February 15 – 18, 2011.
  • Adewumi B. A. 2011. Adapting engineering technology and allied practices toward climate change. Proceedings  of the 4th National Conference of the School of Engineering, Kwara Polytechnic, Ilorin, Kwara State, Nigeria, held  on Sept. 7 – 9, 2011.
  • Adewumi B. A. 2011. Rural roads and infrastructures: crucial and indispensable issues in national development Proceedings of the National Annual Conference of the Nigerian Society of Engineers, held at Calabar on December 3 – 7, 2011.
  • Asiru, W.B., Igbeka, J.C. and Olayanju,T.M.A., 2011: Energy Expenditure in Gari Processing Activities by Nigerian Women. ASSET – An International Journal. Series B Volume 10 Number 1. University of Agriculture, Abeokuta, Nigeria
  • Dairo O.U, Olayanju, T.M.A, Ajisegiri E.S.A., Awonorin O.O and Alamu O.J. 2011: Influence of catalyst quantity and reaction time on the in-situ production of biodiesel from raw castor bean seed using response surface methodology. ASSET – An International Journal. Series B Volume 10 Number 1. University of Agriculture, Abeokuta Nigeria.
  • Dairo O.U, Olayanju, T.M.A, Ajisegiri E.S.A., Awonorin O.O and Alamu O.J. 2011: Effect of temperature and percentage of initial catalyst on the in-situ production of biodiesel from castor oil bean seed using response surface methodology. ASSET – An International Journal. Series B Volume 10 Number 1. University of Agriculture, Abeokuta Nigeria.
  • Dairo, O.U, Olayanju, T.M.A., Ajisegiri, E.S.A., Awonorin, S.O., and Alamu, O.J. 2011. Influence of Catalyst amount and Alcohol-seed ratio on the production of bio-diesel from raw castor oil bean seed using in-situ technique. LAUJET Volume 10 Number (1). Ladoke Akintola University of Technology, Ogbomosho, Nigeria
  • Adisa, A. F. and Braide, F.G. 2009. Design and Development of Template Row Planter. Transnational Journal of Science and Technology (TJST), Republic of Macedonia, vol. 2, No. 7:  p27- 33.
  • Adisa, A. F. 2011. Performance and Assessment of Farm Equipment Utilization in a Nigeria  Arable Farm. Journal of Agricultural Sciences, Science, Environment and Technology (ASSET), University of Agriculture, Abeokuta, Nigeria. Accepted in March , 2011.
    45.    Adisa, A. F. 2011. Design and Construction of Manually Operated Flute Planter with Fertilizer Distributor. Journal of Agricultural Sciences, Science, Environment and Technology (ASSET), University of Agriculture, Abeokuta, Nigeria. Accepted in March , 2011.
  • Adisa, A. F. 2011. Design and Development of an Epicyclic Gear Transmission Laboratory  Dynamometer. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS) (ISSN: 2141-7016).UK. Accepted in April 2011.


2010

  • P. O.O. Dada, O.S. Abiola.  Assessment of on-farm travel characteristics of small scale farmers in Ibadan Southwestern Nigeria. ASSET Journal series B, Vol. 9 No. 2 (2010)
  • Soladoye, O.P., Ola, I.A., Adebowale, A.A., Sanni, L. 2010 Development and performance evaluation of a motorized globulator for tapioca production. International Food Research Journal 17, 549-555.
  • A. Sobowale, J.K. Adewumi, D.B. Adie and J.A. Otun (2010).Water Resources Potentials of Hadejia River Sub-Catchment of Komadugu Yobe River Basin in Nigeria. Agricultural Engineering International: CIGR Journal, 2010, 12(2): 1-6 http://www.cigrjournal.org/index.php/Ejounral/article/view/1065 (Published in USA)
  • Adisa, A. F. 2010. Operational Planning and Management of Mechanized Soybean/Maize Production Technology in Nigeria. Proceedings of 10th International Conference of Nigeria Institute of Agricultural Engineers, Enugu, Nigeria. Page 110- 117.56.
  • Adewumi B. A. 2010. Important engineering issues in the post harvest technology and quality assurance for fruits and vegetables in Africa. In: Biotechnology Development and treat of climate change in Africa: The case of Nigeria (Vol. 2), Adebooye, C. A., Taiwo, K. A. and Fatufe, A. A (Eds.). Book Project of the Alexander von Humboldt Foundation published by Cuvillier Verlag Gottingen, Germany. Pp 53-62.
  • Adewumi B.A, K. P. Adejuwon, H. N. Ayo-Omogie,   A. Jeff-Agboola, T. A Opeyemi, R. O Osaade and B. O. Akomolafe. 2010. Microbial study on the concentrates produced from tropical fruits using dry freezing and rotary evaporation. In: Biotechnology Development and treat of climate change in Africa: The case of Nigeria (Vol. 1), Adebooye, C. A., Taiwo, K. A. and Fatufe, A. A. (Eds.). Book Project of the Alexander von Humboldt Foundation published by Cuvillier Verlag Gottingen, Germany. Pp 305-311.
  • Akinoso R., Aboaba S.A. and Olayanju T.M.A, 2010: Effect of Moisture Content and Heat Treatment on Peroxide Value and Oxidative Stability of Unrefined Sesame oil. African Journal of Food Agriculture, Nutrition and Development. Volume 10, Number 10, pp4268 – 4285 African Schorlarly Science Communication Trust Kenya
    (online @http://www.ajfand.net)
  • Akinoso R, Olayanju T.M.A., Hassan L.O, Ajiboshin I.O, Adeyemi S.K., 2010: Design, Construction and Preliminary Testing of a Beniseed (Sesamum indicum) Air-Screen Cleaner. ASSET – An International Journal. Series B Volume 10 Number 1. University of Agriculture, Abeokuta Nigeria33.    Bolaji, B.O., Olayanju, T.M.A., and Taiwo, O.O., 2010: Performance Evaluation of a Solar Wind – Ventilated Cabinet Dryer. The West Indian Journal of Engineering. Volume 33, Nunmbers1/2. University of West Indies, Trinad and Tobago.


2009

  • Adisa, A. F. 1989. Planning, Operation and Evaluation of Mechanized Field Operation for Agriculture Production, Proceedings of Nigeria Society of Agricultural Engineers, Zaria, Nigeria. Page 197-208
  • Adisa, A. F., Ndirika, V. I. O., Yiljep, Y. D., and Mohammed, U. S. 2009. Development of Pedestrian Controlled Stripper Harvester for Nigeria Rice Fields. Proceedings of 2nd International Conference of Nigeria Institute of Agricultural Engineers, South- East, Abakaliki, Nigeria. Page 53- 62.
  • Adisa, A. F., Inns, F. M. 2009. Assessment of the Power Demand of a Rubber Roller Rice Dehusking Machine. Proceedings of 2nd International Conference of Nigeria Institute of Agricultural Engineers, South- East, Abakaliki, Nigeria. Page 46- 52.

Grains classification using aerodynamic principles

Print PDF

Authors: B.A Adewumi, B.V. Sathyendra Rao, N.L. Kiran Kumar, V.M Pratape, A. Srinivas

African Crop Science Conference Proceedings; Vol. 8. (2007) pp. 1799-1801

Abstract

Winnowing is the general age long method of separating chaff from grains.  Classification process such as cleaning and grading are done with machines such as aspirator, specific gravity separator, size grader/ sieve and destoner which result in increased unit cost, and space, energy and machine requirements.